Online Help > Commands > Help > Profiler

Debug only

Description

 

TOPIC UNDER CONSTRUCTION

 

Sometimes when an issue occurs while using Remote Desktop Manager for Mac, the support personnel may ask you to turn on debugging and send the information back. Here are two procedures that you can follow.

 

BadgeWarning48x48

Any debug level other then zero will slow down the application and write a lot of information in the application logs. As soon as you have completed the diagnostics you should revert back the debug level to zero.

 

Settings

 

Use the debugging method whenever you need to diagnose the start-up or initial connection.

 

1. Start by clicking on Help - Profiler. Move the window aside to clear the main window of Remote Desktop Manager for Mac

 

Perfromance Profiling

Perfromance Profiling

 

2.In the Debug only tab, click on the ellipsis button and activate the proper debug categories.

 

Help - Profiler - Debug only

Help - Profiler - Debug only

 

3. In Remote Desktop Manager for Mac, click on Flags to check what perform the action that is under investigation.

 

Performance Profiling - Debug level

Performance Profiling - Debug level

 

4. Then, click on Send trace to support. In the following dialog, ensure you specify enough information to link the report to the appropriate ticket, if the process was started from the forum include your forum user name.

 

Send trace to support

Send trace to support